This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
This is Jinyang and I am doing research for DMD development.
I would like to use LabVIEW to control and sync DMD to other hardware of my system. Could you please provide me some sample code of LabVIEW?
I promise I will never share the code for any commercial purpose. I really appreciate it and look forward to hearing from you soon.
Welcome to the DLP section of the TI-E2E Community.
Could you tell me what platform this is in reference to? [i.e. D4100, Pico, LightCommander or LightCrafter]
We are glad that we were able to resolve this issue, and will now proceed to close this thread.
If you have further questions related to this thread, you may click "Ask a related question" below. The newly created question will be automatically linked to this question.
In reply to Fizix:
I am using D4100.
In reply to Jinyang Liang:
For the D4100 platform, please request this code from the Design House that you purchased your kit from. Please see this link --> DLP Design Houses
We route the requests through our Design Houses to ensure compliance with US export regulations.
I request this information from you before and you sent me the LabVIEW code. Could you please do me a favor again?
We since have changed our policy on providing this type of software through the E2E forums. You will need to request it from one of the design houses. They will be happy to provide it to you. They should have it, but if not I will be happy to provide it to them.
Hi Fizix, I got the code from my designer house for the DMD 4100 but I have a problem when I run the vi, there is a error. it recognized the chip 0.55 XGA but it cannot load the images. The error out says: program_FPGA.vi How I can fix it? or what I am missing.
In reply to MBAE:
I forgot to mention, I am running the Int-Load_Run 2 Images.vi
What version of LabView are you running? And what version of Windows are you running?
Also, did you unzip all of the files from the zip file into one directory and run the vi from that directory?
Yes I unzipped the files in one folder and run the vi from there. I have 2011, 2012 and 8.5 Labview version and is not working in any of those...
Hi Do you have any other suggestion why is not working on labview if it is working on DIscovery?
All content and materials on this site are provided "as is". TI and its respective suppliers and providers of content make no representations about the suitability of these materials for any purpose and disclaim all warranties and conditions with regard to these materials, including but not limited to all implied warranties and conditions of merchantability, fitness for a particular purpose, title and non-infringement of any third party intellectual property right. No license, either express or implied, by estoppel or otherwise, is granted by TI. Use of the information on this site may require a license from a third party, or a license from TI.
TI is a global semiconductor design and manufacturing company. Innovate with 100,000+ analog ICs andembedded processors, along with software, tools and the industry’s largest sales/support staff.