• State Resolved
  • Locked Locked
  • Replies 1 reply
  • Subscribers 27 subscribers
  • Views 552 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

DLPDLCR4710EVM-G2: Working distances and projection area of divers Evaluation modules

Stephan Zehnder5
Prodigy 10 points
Part Number: DLPDLCR4710EVM-G2
Other Parts Discussed in Thread: DLPDLCR3310EVM, DLPLCR4500EVM

Hey

Unfortunately I could not find information about minimal and maximal working distances and the size of the projection area. Can you please provide me those info's? Also, is it still the case that this products can not be controlled by MATLAB or has there been an update?

DLPDLCR4710EVM-G2
DLPDLCR3010EVM
DLPDLCR3310EVM
DLPLCR4500EVM
DLPLCR6500EVM (this product needs an additional objective from a third-party manufacturer, right?)

Looking forward to your answer.

Best,

Stephan

  • 0
    TI__Expert 3240 points

    Hello Stephan,


    Thanks for using the DLP E2E forums! The information you see will be in the EVM user guides section titled "Light Engine". Keep in mind that this is simply our reference design, end equipment optics can be very different if you desire. Such as ultra short throw or different vertical offset.

    You are correct about he DLPCLR6500 EVM. That does not come with optics.

    Best,

    ~Danny W