This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

  • Resolved

[FAQ] DLPLCR9000EVM: DLP Lightcrafter 9000 EVM only activates half the DMD when using DisplayPort

Prodigy 645 points

Replies: 1

Views: 682

Part Number: DLPLCR9000EVM

I can only get my DLP LightCrafter 9000 EVM to activate half the DMD when using DisplayPort.

  • Try using dual pixel mode instead of single pixel mode. Single pixel mode loads one pixel per clock to the DMD and dual pixel mode load two pixels per clock to the DMD.

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.