DLPDLCR2010EVM: Extract the batch file from the firmware

Youngsoo Jang

Part Number: DLPDLCR2010EVM

I want to extract the batch file from the firmware as shown in the title.

To change Keystone, I made a batch file and updated it with firmware.

However, the operation is not normal, so I would like to compare it with mine by reading the batch file of the basic firmware you provide.

So I tried to open the firmware and find a way to read it, but i can't make it.

Can you provide the batch file in the firmware by any chance?

Also, I want to make my DLP sofware in factory initialization.

but I don't know how.

Sincerely

Youngsoo Jang

over 5 years ago

0 Philippe Dollo over 5 years ago

TI__Mastermind 28005 points

Jang,

Which version of the LightCrafter Display GUI are you using? Furthermore, what batch files are you attempting to run on your system? If possible, please share more information about what you are trying to do with batch files on your system so we can assist you further.

It looks like you have made multiple threads on this topic. I will request that we continue discussion in the thread linked below:
e2e.ti.com/.../734753

Best Regards,
Philippe Dollo

0 Navneet Singh over 5 years ago in reply to Philippe Dollo

TI__Expert 4610 points

Hello Jang,

It looks like you have created the same ticket for this issue " e2e.ti.com/.../734753 ", and our expert is working on that ticket.

So, I am closing this ticket, you can continue ask the experts on other ticket.

Thanks,
Navneet

DLP®︎ products

DLP products forum

DLPDLCR2010EVM: Extract the batch file from the firmware