This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

  • TI Thinks Resolved

DLPNIRSCANEVM: Reference taking a long time and scanning is not even finishing

Prodigy 100 points

Replies: 3

Views: 210

Part Number: DLPNIRSCANEVM

Hi,

I tried taking a  reference scan with empty cuvette (in Quick Scan mode). From the moment I hit the "Riu Reference Scan", it shows "Reference Scan in Progress" and it never finishes! I waited for 20 minutes. How much times does it take? It does not even seem like finishing.

Regards,

Sumaiya Shomaji

  • Hi Sumayia,

    Thanks for your interest in DLP Technology. Are you using the latest version of DLPC350 and Sitara AM3358 firmwares? If not kindly flash the latest version of DLPC350 firmware (v3.1) and Sitara AM3358 firmware (v2.0) and see if the problem persists.

    Regards,
    Hirak.
  • In reply to Hirak Biswas:

    Hi,

    Can you please kindly provide me the link for Sitara AM3358 firmware (v2.0) download in Windows 10? In TI website I found the link for linux only. And also, apart from  DLPC350 and Sitara AM3358 firmwares softwares, do I need to install something else?

    Regards,

    Sumaiya

  • In reply to Sumaiya Shomaji:

    Hi Sumaiya,

    Kindly find the AM3358 firmware in the following link www.ti.com/.../marketurl.tsp
    Also, you'll need the LightCrafter 4500 GUI to flash the DLPC350 firmware on the chip.

    Thanks & Regards,
    Hirak.

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.