• State Resolved
  • Locked Locked
  • Replies 1 reply
  • Subscribers 26 subscribers
  • Views 346 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

DLPC3479: I2C Slave address

Uryyy
Expert 1770 points
Part Number: DLPC3479

DLPC3479 Software Programmer's Guide describes address is 0x36 or 0x3A. I would like to know how to switch the address(use another address).

  • 0
    TI__Expert 5485 points
    Hi Hidenori,

    The I2C slave address is firmware-specific. By default the I2C address for firmware available on ti.com is 0x36. If you need firmware with address as 0x3A you will have to send us a request for the same and we will provide it to you via TI mySecure software.

    Hope this clarifies your question.

    Regards
    Azad