DLPLCR4500EVM: Pin connections of J6 Connector

Jonathan Geronga

Part Number: DLPLCR4500EVM
Other Parts Discussed in Thread: DLP4500

Hi Team,

We have a customer that is having a hard time locating the pins 3, 5 (For USB Host port 3 data +/-) and pins 7, 8 for the DGND.
Can you share an image for the pin signal configuration of J6 connector and its position in the DLPLCR4500EVM board?

Thanks,

Jonathan.

over 4 years ago

0 Kyle Rakos over 4 years ago

TI__Mastermind 20045 points

Hello Jonathan,

Please find the table listing the pins of J6 in Table 6-4 in the DLP4500 user's guide (http://www.ti.com/lit/ug/dlpu011f/dlpu011f.pdf). You can find the full schematic at http://www.ti.com/lit/df/tidr157a/tidr157a.pdf and the layout at http://www.ti.com/tool/DLP4500-C350REF. The customer can confirm if they have found pin 3 and 5 since just below is pin 7 which is attached to ground. This can simply be confirmed with a multimeter.

Thanks,
Kyle

0 Jonathan Geronga over 4 years ago in reply to Kyle Rakos

TI__Expert 7930 points

Hi Kyle,

Thank you very much for this information.
The customer closed the ticket already and this resolves the issue.

Thank you for your support.

Regards,

Jonathan

DLP®︎ products

DLP products forum

DLPLCR4500EVM: Pin connections of J6 Connector