• State Resolved
  • Locked Locked
  • Replies 4 replies
  • Subscribers 27 subscribers
  • Views 305 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

DLPC3430: Questions for splash image of DLPC3430

user3991373
Prodigy 60 points
Part Number: DLPC3430
Other Parts Discussed in Thread: DLPA2005, DLPA2000

I am designing board of DLPC3430 + DLPA2000 projection system ， and i using the firmware of DLPC3435_3.0.0_Firmware.img.

I want to modify the  splash image by using the DLP LightCrafter Display v7.4, but failed.

Thanks!!!

  • 0
    TI__Mastermind 20045 points

    Hello,

    Unfortunately the update flash image in the GUI (such as modifying the splash image) is only intended to be used with the latest EVM firmware. It looks like you are using an old version of the EVM firmware which only supports the DLPA2005 and you have indicated you are using the DLPA2000.

    Do you have an optical engine manufacturer you are using to get the firmware? If you have an optical engine manufacturer you are working with they usually provide the firmware. Could you please also let me know your DMD to controller pin mapping option you are using?

    Thanks,

    Kyle

  • 0 in reply to Kyle Rakos
    Prodigy 60 points

    DMD Pin Mapping Options is OPTION 1

  • 0 in reply to user3991373
    TI__Mastermind 20045 points

    Hello,

    Thank you for confirming the pin mapping. Could you please also confirm the other question:

    Do you have an optical engine manufacturer you are using to get the firmware? If you have an optical engine manufacturer you are working with they usually provide the firmware. 

    Thanks,

    Kyle

  • 0 in reply to Kyle Rakos
    Prodigy 60 points

    We haven't started looking for an optical engine manufacturer yet，and we will find one.

    Thank you for your reply！！！