Dear TI experts,
I have two questions regarding the LED current.
1. On page 25 in the user manual of DLP4500, it says "The DLP LightCrafter 4500 is an actively cooled system that has a thermal limit resulting in total simultaneous red, green, and blue LED currents less than 4.3 A for continuous LED operation.". Does that mean my current of R, G, and B should not add up to more 4.3A for a long time? If so, the default setting (R104, G135, B130) will exceed 4.3A, is that normal?
2. I would like to request for a complete data sheet for the RGB performance graph on page 25. As I would like to determine the white balanced point at different current combinations. Thank you!
Sincerely,
Raymond