This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

  • Resolved

DLPC3433: about the dlpc3433 firmware

Prodigy 60 points

Replies: 5

Views: 128

Part Number: DLPC3433

HI

We built the board with DLPC3433, DLPA2000 and DLP3010.

I am using the firmware form here :  http://software-dl.ti.com/dlp/pico-fw-selector/.

Then , I find the display mode is in "Test Pattern generator" with a checkerboard when booting up.

And, I want to set dark screen as initial splash screen with "External video port" mode.

Can  you provide a firmware image or software tool?

Best Regards

  • Hello user,

    Are you looking to set the default bootup behavior for the system?

    If so, what are you looking for? A solid black field or external video input?

    Regards,

    Philippe Dollo

    If a post answers your question, please click the "Verify Answer" button.

  • In reply to Philippe Dollo:

    Philippe,

    Thank you for your response.

    Yes, both of them,no splash screen and external video input ,can this be achieved ?

  • In reply to user3991373:

    User,

    The DLP LightCrafter GUI tool has a feature that lets you swap the splash screen on boot to a different setup. Furthermore, the MSP430 code on the LightCrafter EVM can be configured to perform various I2C actions on system boot or when detecting an external source. Have you tried these methods yet?

    http://www.ti.com/tool/DLPLCRD-GUI

    Regards,

    Philippe Dollo

    If a post answers your question, please click the "Verify Answer" button.

  • In reply to Philippe Dollo:

    Hi Philippe,

    I have tried,but it doesn't work.

    And i want to change batch file,but the board is designed by ourself,so,i need  you to provide a firmware image or software tool.

    Best Regards

  • In reply to user3991373:

    Hello user,

    Unfortunately, the flash image update tool only works with firmware built specifically for the EVM. Other variants may not work with the GUI's flash update tool. I apologize for the inconvenience.

    Regards,

    Philippe Dollo

    If a post answers your question, please click the "Verify Answer" button.

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.