DLPC3479: Internal Pattern as actual measurement of 8bit Gray-32

Expert 1355 points

Replies: 1

Views: 22

Part Number: DLPC3479

Hello,

My DLP&Camera System send simultaneous trigger as shown below.

I think desired value of Gray-32(5bit plane) time is 677usec as 5400usec exposure time.

I measured actual 5bit mirror-on time by using camera exposure. However, the measured time is 634usec by shifting camera exposure delay.

Could you please let me know how to getting closer to the desired value : 677usec?

Regards,

Uryyy 

1 Reply

  • Uryyy,

    Are you executing this configuration on a custom DLPC3479 board or using a DLP4710-LC EVM (with the Light Control GUI)?

    If you are on the GUI, can you share your pattern configuration?

    Regards,

    Philippe Dollo

    --------------------------------------------------------------------------------------------------------

    If a post answers your question, please click the "Verify Answer" button.

    Have questions about DLP Pico Chipsets? Check out the DLP Pico Universal FAQ for quick answers: https://e2e.ti.com/support/dlp/f/94/t/946506