DLPC900: DLPLCR50XEVM

Peter678

Part Number: DLPC900
Other Parts Discussed in Thread: DLPLCR50XEVM,

Hi,

DLPLCR50XEVM have dual DLPC900 controllers, and I want to control it via matlab. I find there existing the similar question:

Is it different from the single DLPC900 controller? Can I control the DLPCR50XEVM with the same matlab code?

Best regards.

0 Fizix over 3 years ago

Peter,

Please review the DLPC900 Programmer's Guide --> https://www.ti.com/lit/pdf/dlpu018.

This document will help you understand that there are some commands that have to be done for both the primary and secondary controller. Many do not.

This document should help you identify the tweaks you will need to make for code to control the unit.

So the answer is you cannot directly control a dual controller EVM with code for a single controller EVM without modification.

Fizix

0 Peter678 over 3 years ago in reply to Fizix

Thanks!

DLP products forum