Hello,
I'm understanding Pattern Ready(GPIO_06) signal is valid when TRIG_IN(mode) is used. How long is the typical time of range as PAT_RDY(GPIO_06)=Low(busy)? I have been able to measure around 6msec.
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Uryyy,
The busy time of pattern ready signal is not fixed and is dependent on the type and size of the pattern set that will be loaded into the controller.
I hope this answers your query. Let me know if you have any further questions regarding this.
Regards,
Mayank