DLP650LNIR: Connecting plates model with dimensions

Nikolay Lipey

Part Number: DLP650LNIR
Other Parts Discussed in Thread: DLP5500,

Could you send me SOLIDWORKS model or a draft with dimensions and sizes of DLP650LNIRFYL connecting plates (the ones that screws together).
We need it in order to adjust our assembly for the plates.

Looking forward to your support.

over 4 years ago

0 Fizix over 4 years ago

TI__Guru 54705 points

Hello Nickolay,

Sorry for the delayed response to your request.

I have put in a request with our mechanical engineering team on this.

I hope to have a response by the end of the day on 03/30.

Thank you for your patience.

Fizix

0 Nikolay Lipey over 4 years ago in reply to Fizix

Prodigy 50 points

Hello Fizix,
Thanks for the update. Looking forward to the help from your mechanical engineering team.
This an urgent request because it appeared to become our bottleneck problem.

Devoted TI customer,
Nikolay

0 Nikolay Lipey over 4 years ago in reply to Fizix

Prodigy 50 points

Help please

+1 Fizix over 4 years ago in reply to Nikolay Lipey

TI__Guru 54705 points

Nikolay,

This turned out to be a little more complicated. At this point we have mounting concepts for the S450 package DMD's. The one targeted in this document [ https://www.ti.com/lit/an/dlpa015/dlpa015.pdf ] is the DLP5500, but the external package is the same as the DLPLNIR650.

The internal measurement differences are encompassed in the DLP650LNIR ICD at the end of the data sheet.

If this does not meet what you need PLEASE let me know!

0 Nikolay Lipey over 4 years ago in reply to Fizix

Prodigy 50 points

Fizix,

We need a scheme with exact dimensions for SOLIDWORKS of DLP650LNIRFYL mounting concept, especially the Interface optical as you call it on page 21.
The attached document doesn't provide sufficient dimensions of the mounting concept.

Looking forward to your help.

0 Fizix over 4 years ago in reply to Nikolay Lipey

TI__Guru 54705 points

Nickolay,

If the STP files were sufficient, please mark this item as closed. Thanks.

DLP®︎ products

DLP products forum

DLP650LNIR: Connecting plates model with dimensions