• State Resolved
  • Locked Locked
  • Replies 2 replies
  • Answers 1 answer
  • Subscribers 27 subscribers
  • Views 750 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

DLPLIGHTCRAFTER: LightCrafter GUI does not find projector

Cecile Carlson
Prodigy 30 points

Part Number: DLPLIGHTCRAFTER

Hi,

I have a DLP LightCrafter 2010 EVM, and I am trying to use the LightCrafter GUI to change the LED currents on the board.
I installed DLP LightCrafter Display v7.0. After launching the application, it does not seem that it is able to communicate with my board. I get an error message saying "Error: No projector files could be found. Please contact a TI Application Engineer". (see the attached screenshot)

Could you help me fix this? Am I missing some drivers? Or do I not have the right version of the software?

Thank you,

cecile

  • 0
    TI__Mastermind 28005 points

    Cecile,

    Welcome to the E2E forums, and thanks for your interest in our DLP technology.

    If you launch the LightCrafter GUI directly via the .exe, the application will not load a .projector file as a schema. This projector file is important for populating the GUI with commands to use. Be sure to use one of the installed shortcuts to launch the GUI.

    Let me know if you continue to have issues.

    Best Regards,

    Philippe Dollo

  • 0 in reply to Philippe Dollo
    Prodigy 30 points

    Thank you Philippe.

    I think it did not install properly on my computer as I couldn't get the shortcut, but it did work on a different computer.

    Best regards,

    cecile