DLP4500: Program of DLPC350

Hiroyasu Tazawa1

Guru 12350 points

Part Number: DLP4500
Other Parts Discussed in Thread: DLPC350

Hi,

Let me talk about DLPC350.

It is described in DLPC350 Programmer's guide.

What does it means "re-sent".

It should be send image again?

Best Regards
Hiroyasu

over 8 years ago

0 Paul Goedeke over 8 years ago

TI__Mastermind 30600 points

Hi Hiroyasu,

That is correct. Basically, if you have some image which is not part of a pattern sequence that you're displaying as a still (non-moving) image, you should resend the image data to the DLPC350 so that there is no chance of corruption when the axis is flipped.

Hope that helps,

-Paul

0 Hiroyasu Tazawa1 over 8 years ago in reply to Paul Goedeke

Guru 12350 points

Hi, Paul

Thank you for your reply.

I want to confirm about this re-send.
I understood we should resend in Video mode.

My customer want to use this Flip command in in Structured Light mode.

Should we re-send in Structured Light mode ?

Best Regards
Hiroyasu

0 Paul Goedeke over 8 years ago in reply to Hiroyasu Tazawa1

TI__Mastermind 30600 points

In structured light mode it is not necessary to re send because we assume that patterns will be changing. From the programmer's guide:

In Structured Light mode, the image flip will take effect on the next bit-plane, image, or video frame load

Best,

Paul

0 Hiroyasu Tazawa1 over 8 years ago in reply to Paul Goedeke

Guru 12350 points

Hi, Paul

Thank you for your reply,
I got it.

Best Regards
Hiroyasu

DLP®︎ products

DLP products forum

DLP4500: Program of DLPC350