• State TI Thinks Resolved
  • Locked Locked
  • Replies 1 reply
  • Answers 1 answer
  • Subscribers 27 subscribers
  • Views 331 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

Original question:

DMD LabVIEW sample code

New DLP Applications & Technology Forum

Zhihan Hong
Prodigy 10 points
Part Number: DLP4500

Hi,

I am the graduate student in University of Arizona, and I want to use the labview to control the DMD pattern projection.

Would it be possible for me to get the labview code sample of DLP4500.

Thanks a lot.

Sincerely,

Zhihan

  • 0
    TI__Mastermind 22840 points
    Hello Zhihan,
    Welcome to DLP forum! If understand your question correctly, you are looking for a code to control DLPLightCrafter 4500 EVM with Labview.

    Please consider downloading DLP LightCrafter 4500 EVM GUI. It is open source and has reference code that may help helpful in your development. It can be found at www.ti.com/.../DLPLCR4500EVM

    Please also refer to previous threads on similar subject.

    I hope this helps.
    Regards,
    Vivek