lightcrafter pcb schematic and layout

massimiliano gabrielli

Hi, we are developing a very close to lightcrafter systems.

Is it possible to have electrical schematics in orcad or any cad format ?

Is it also possible to have gerber files of the boards, they allows to reduce prototyping time and also allows to patch boards to make some tests.

Best Regards

Massimiliano

over 13 years ago

0 Divya Reddy over 13 years ago

TI__Expert 4500 points

Hi Massimiliano,

We are considering to provide the schematics and layout files for the LightCrafter boards. Please allow couple of weeks before they are available to download on TI website.

Also, can you provide details of your application?

Thanks for your patience.

Regards,

Divya

0 Divya Reddy over 13 years ago in reply to Divya Reddy

TI__Expert 4500 points

Hi Massimiliano,

4263.Driver Board-B-Layout and Gerber files-122011.rar

2514.System Board-B-Layout and Gerber files-122011.rar

Attached are the system and driver board Gerber and layout files.

Please read the below Terms & Conditions carefully. Note that opening the attached files indicate you have agreed to the following terms and conditions.

These files should also be available on the TI website to download soon.

Regards,

Divya

0 massimiliano gabrielli over 13 years ago in reply to Divya Reddy

Prodigy 40 points

Many thanks for the files. The application will be a 3D measuring system. The DLP is used to create periodic patterns tah are projected in a surface and a smart camera triggered by lightcrafter will get images and elaboarte them.