DLPC350 Pattern Sequence Play once

M.H

Genius 5960 points

Other Parts Discussed in Thread: DLPC350

Hi,

I am the operation check of Play once of DLPC350 Pattern Sequnece mode.

(1)

　Pattern Exposure = 10000

　Pattern Period = 10000

　　Play Once check

(2)

　Pattern Exposure = 9500

　Pattern Period = 10000

　　Play Once Check

(1) (2) of the difference is only Pattern Exposure.

Q1)

In the case of (1), to display only once.

In the case of (2), to display six times.

Why is (2) indicated 6 times?

Attach an example of setting the GUI.

Best Regards,

hamada

over 10 years ago

0 Clinton Rodgers over 10 years ago

TI__Genius 13235 points

Hi Hamada,

Thanks for posting. I have recreated the behavior you described. We are investigating the root cause. We will reply back with details as we have them.

Thanks again,
Clinton

0 M.H over 10 years ago in reply to Clinton Rodgers

Genius 5960 points

Hi, Clinton.

Thank you for reply.

Please continue the investigation.

Best Regards,
hamada

0 M.H over 10 years ago in reply to M.H

Genius 5960 points

Hi, Clinton.

Is there any development?

Best Regards,
hamada

0 Sanjeev over 10 years ago in reply to M.H

TI__Mastermind 30875 points

Hamada-san,
can you please send me friends request? I would like to discuss about the customer.
Regards,
Sanjeev

0 M.H over 10 years ago in reply to Sanjeev

Genius 5960 points

Hi, Sanjeev.

OK.I sent a friend request.

Best Regards,
hamada

0 Sanjeev over 9 years ago in reply to M.H

TI__Mastermind 30875 points

Hi Hamada-san,

We debugged the issue; there is bug in the GUI v3.0.1 source code. We will correct it and release it in the next release.

For now,

if you are able to compile and GUI from the source code, I suggest you to modify the below function -

GUI Source code / mainwindow.cpp

void MainWindow::on_pushButton_PatSeqCtrlStart_clicked()

{
int i = 0;
unsigned int patMode;
DLPC350_PatternDisplay(2);

//Delete below code in the GUI
SleeperThread::msleep(100);
while(1)
{
DLPC350_GetPatternDisplay(&patMode);
if(patMode == 2)
break;
else
DLPC350_PatternDisplay(2);
SleeperThread::msleep(100);

if(i++ > MAX_NUM_RETRIES)
break;
}

}

Regards,
Sanjeev

DLP®︎ products

DLP products forum

DLPC350 Pattern Sequence Play once