• State TI Thinks Resolved
  • Locked Locked
  • Replies 3 replies
  • Answers 1 answer
  • Subscribers 27 subscribers
  • Views 729 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

DLPC2607: Where I can find specification and data structure of the contour mitigation look-up table (CMT)?

Lin SHI
Prodigy 85 points
Part Number: DLPC2607
Other Parts Discussed in Thread: DLP2000

Hi,

Where I can find specification and data structure of the contour mitigation look-up table (CMT)?

Thanks.

Lin Shi

CMT

  • 0
    TI__Mastermind 28005 points
    Lin,

    The CMT LUT is dynamically generated based on the input sequences used by the system. As such they are typically not intended to be manually modified in memory. What are you trying to do with your system?

    Best Regards,
    Philippe Dollo
  • 0 in reply to Philippe Dollo
    Prodigy 85 points
    Dear Philippe,

    Thank you for your reply.

    According to the documents, I need a special CMT table in order to disable spatial dithering.

    Now, I am not satisfied with the complex interfaces provided by the DLPC controllers and want to create a simple one with FPGA.
    Is it possible to controll the DMD with FPGA?

    Thanks.

    Lin
  • 0 in reply to Lin SHI
    TI__Mastermind 28005 points
    Lin,

    If you are capable of writing to the flash via SPI or the DLPC2607 via I2C then you could feasibly rewrite the flash with an FPGA system using either protocol. However, I am not sure we support disabling spatial dithering on the DLP2000 at this time. I will inquire for you.

    Best Regards,
    Philippe Dollo