Other Parts Discussed in Thread: SIGCONARCHITECT
Hi Sir,
could you help provide eeprom fw for 1000-BASE-X (10G-KR) application?
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Hi Sir,
could you help provide eeprom fw for 1000-BASE-X (10G-KR) application?
Greetings Tommy,
EEPROM content is highly application dependent.
Please note a link to SigconArchitect GUI - V2.0.0.8 with WRT - and profiles for repeaters including DS100BR111 below. Please run GUI in demo mode to enable EEPROM hex file creation. You can use EEPROM tab to create specific settings needed by your application.
SigconArchitect GUI:
https://www.ti.com/tool/SIGCONARCHITECT?keyMatch=SIGCON%20ARCHITECT&tisearch=search-everything
SigconArchitect-Repeater-Profiles V1.0.0.1. Same link as above. After unzipping you can install DS100BR111 profile.
Regards,,Nasser