MAX3232E: MAX3232IDRE4

Sergio Romero

Part Number: MAX3232E

During functional test process we have obtained intermittence results and according of a failure analysis performed we detected a kind of noise in the low level of the signal on failing units in component AXI-44766 (MAX3232IDRE4).

over 2 years ago

0 Eric Hackett over 2 years ago

TI__Guru 60242 points

Sergio,

I'm not sure what the question is here. Are you asking what we think the root cause of the failure is? If so, can you give more information on the test/operation that was being performed when the failure occurred?

Regards,

Eric Hackett

0 Sergio Romero over 2 years ago in reply to Eric Hackett

Prodigy 10 points

Hi Eric,

Yes, the question is: What could be the root cause of the failure is?

I have a Failure Analysis report performed by my team, but I can not attach it here. Do you have any email where could I send you??

Thanks!!

Sergio Romero.

0 Eric Hackett over 2 years ago in reply to Sergio Romero

TI__Guru 60242 points

Sergio,

Feel free to send it to e-hackett@ti.com. Since we're taking this to email, I'm going to close this thread.

Regards,

Eric Hackett

Interface

Interface forum

MAX3232E: MAX3232IDRE4