• State TI Thinks Resolved
  • Locked Locked
  • Replies 1 reply
  • Answers 1 answer
  • Subscribers 32 subscribers
  • Views 95 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

DS125DF111EVM: No singal detected on Channel A

Jue Wang
Prodigy 30 points
Part Number: DS125DF111EVM

Hi, there

Can I ask a question regarding the DS125DF111EVM:  when 10Gbps Vpp=100mV data input was on channel B, everything works great, however when I just switch the input from channel B to channel A, no signal detected and current only 25 mA (3V). 

I can not find any register would select each channel ?  Is SMA1 and SMA5 can work  both way as input/output  as it is labled as "OutA+/InA+"?

Thanks alot

Regards

Jim

  • 0
    TI__Guru* 88835 points

    Hi Jim,

    Since we have 25mA current consumption as you noted, it seems channel A is not active. I am wondering if perhaps LPBK could be floating? In this case, INB goes to OUTA and OUTB. Please make sure LPBK is pulled high(INA to OUTA and INB to OUTB). Device 100-ohm interface is not bi-directional.

    Regards,,Nasser