This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

DP83TD510E: USB-2-MDIO: MSP430 Launchpad selection?

Part Number: DP83TD510E
Other Parts Discussed in Thread: USB-2-MDIO, MSP430F5529

Team,

Seems like the G2 LP recommended is not available anymore.
MSP-EXP430G2ET seems to have replaced the MSP-EXP430G2 listed in the USB-2-MDIO UG.

-Can any MSP430 LP card be used with the USB-2-MDIO SW?
-Since MSP430FR2xxx is very popular can the LP (like LP-MSP430FR2476 or MSP-EXP430FR2433) be used?
-Which one do you recommend for 3.3V and for 5V IOs operation?

Thanks in advance,

A.

  • Hello,

    The USB-2-MDIO tool has only been tested on the MSP430G2 Series and the MSP430F5529, so I would recommend using only one of the two.

    The I/O voltage on the MSP should match the I/O voltage of the PHY. Since the PHY does not support a I/O voltage of 5V, you will have to use 3.3V.

    Regards,

    Adrian Kam