This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

TS3USB30E: Use TS3USB30E to switch LVCMOS 3.3V signal and USB 2.0 High speed signal

Part Number: TS3USB30E

Can I use TS3USB30E( TS3USB30EDGSR) to switch signal between 2 LVCMOS 3.3V signals(connected to D1+, D1-) or USB 2.0 High speed differential signals (D2+,D2-)   to COM(D+ D-)?

Is there any risk , e.g. signal conflict (short) between LVCOMS and USB signal  during switching  ?

If can't work properly, please recommend other solution ?

Thanks