DS80PCI800: Is DS80PCI800 p2p to replace DS125BR800A?

Oliver Lin

Expert 4705 points

Part Number: DS80PCI800
Other Parts Discussed in Thread: DS125BR800A,

Hi expert,

Customer is asking that is DS80PCI800 p2p to replace DS125BR800A?

If yes, what items we will need to be careful of?

over 4 years ago

0 Nasser Mohammadi over 4 years ago

TI__Guru* 93570 points

Hi Oliver,

Yes we can replace DS125BR800A with DS80PCI800. Please note DS125BR800A signal detect bandwidth is different from DS80PCI800. Other than this, these are the same.

Regards,, Nasser

0 Oliver Lin over 4 years ago in reply to Nasser Mohammadi

TI__Expert 4705 points

Hi Nasser,

Thank you for your reply, could you please share more information on the signal detect bandwidth? what we might need to change on the HW side?

0 Nasser Mohammadi over 4 years ago in reply to Oliver Lin

TI__Guru* 93570 points

Hi Oliver,

There is no change on the hardware side. Signal detector bandwidth is increased meaning it can declare signal presence with a data pattern that has a higher frequency content.

Regards,,Nasser

Interface

Interface forum

DS80PCI800: Is DS80PCI800 p2p to replace DS125BR800A?