DP83867ERGZ-S-EVM: Boardsize and mounting hole location

Cedrick

Part Number: DP83867ERGZ-S-EVM
Other Parts Discussed in Thread: DP83867E

Hi,

Good day.

Our customer has the below request regarding the DP83867ERGZ-S-EVM. Can you please help us to provide this? Thank you.

"I am looking for information about the following product DP83867E SGMII EVM. Specifically the size and mounting hole locations. If you would have cad data (step file) to support this that would be great!
I am trying to mechanical package this circuit card and I cannot find any information about its physical size. I presently have your user guide for this but it does not show me any detail information about its size."

Looking forward to your inputs. Thank you.

Regards,

Cedrick

over 2 years ago

0 Vikram Sharma over 2 years ago

TI__Genius 16025 points

Hello Cedrick,

If customer already has the board, can they measure it physically on the board itself? I will look for the layout file also but may be physical measurement will be faster.

Regards,

Vikram

0 Cedrick over 2 years ago in reply to Vikram Sharma

TI__Expert 8270 points

Hi Vikram,

Unfortunately, they haven't receive the EVM yet. If you could provide the needed details, it would be really helpful. Thank you.

Regards,

Cedrick

0 Vikram Sharma over 2 years ago in reply to Cedrick

TI__Genius 16025 points

Hello Cedrick,

Yes I am also following up to locate the required files.

Regards,

Vikram

0 Vikram Sharma over 2 years ago in reply to Vikram Sharma

TI__Genius 16025 points

SV601214C_PCB.pdf

Page 11 and 12 of this layout file has the information customer is looking for.

Regards,

Vikram

0 Cedrick over 2 years ago in reply to Vikram Sharma

TI__Expert 8270 points

Hi Vikram,

Thank you for the document however, it doesn't include the hole location.

Can you provide the exact location? Thank you.

Regards,

Cedrick

0 Vikram Sharma over 2 years ago in reply to Cedrick

TI__Genius 16025 points

Hello Cedrick,

Can you ping me on email? I will reply back with board files.

Regards,

Vikram

0 Cedrick over 2 years ago in reply to Vikram Sharma

TI__Expert 8270 points

Hello Vikram,

Good day.

I've just got a feedback from our customer, unfortunately, they don't have a way of opening the files provided, neither did I. Can you please provide us the numerical dimensions for the hole and the distance between them? Would that be possible? Thank you for your help.

Regards,

Cedrick

0 Vikram Sharma over 2 years ago in reply to Cedrick

TI__Genius 16025 points

Hello Cedrick,

I shared Gerber file also with you. There are free viewers available online. You may suggest this one :

https://www.pentalogix.com/t/software-products/viewmate

It will be better that customer checks all the required dimensions.

Regards,

Vikram

Interface

Interface forum

DP83867ERGZ-S-EVM: Boardsize and mounting hole location