This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

HD3SS460: HD3SS460 vs TMUXHS4212 vs TUSB546A for USB-C PD connecting to display port

Part Number: HD3SS460
Other Parts Discussed in Thread: TPS65988


For a two port USB-C PD (DFP, USB 3.1, data and 5/9/15/20V power) system with a TPS65988 USB controller, what is the best mux to use if the USB-C peripheral device is using a display port? Is alternate mode necessary? If the peripheral device does not use a display port what is the optimal mux to use? Are these muxes compatible with USB 2.0? If not, can you please recommend a mux. Below is a chart where I am getting some of my initial information from.