• State TI Thinks Resolved
  • Locked Locked
  • Replies 1 reply
  • Answers 1 answer
  • Subscribers 32 subscribers
  • Views 66 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

DS125BR800A: Recommand location on PCB...

Peter Tseng
Genius 5555 points
Part Number: DS125BR800A

Dear Sirs,

May I have your suggestion where is the best location to place DS125BR800A on PCB?

Thanks.

  • 0
    TI__Guru* 88905 points

    Greetings Peter,

    Typically we expect at minimum about 4-5dB loss and then you can place DS125BR800A within the link within 24dB loss. It is highly recommended to use IBIS-AMI model of the device to do a preliminary signal integrity analyses to optimize device location. Please send me friend request with your company email address so we can provide with access to this document.

    Regards ,, Nasser