Dear team,
Can you confirm the PWRON flag of TCAN114x-Q1 is ONLY set-up:
- after device power up
- after a hard reset
- (no other way to set this flag to 1)
Thank you very much!
Best regards,
PA
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Dear team,
Can you confirm the PWRON flag of TCAN114x-Q1 is ONLY set-up:
Thank you very much!
Best regards,
PA
Hi Pial,
Yes, the power on (PWRON) flag is only set by power cycling the device on Vsup or by triggering a hard reset via the the device reset register (DEVICE_RST Address = 19h).
Let us know if you have any more questions. If not, please let us know by clicking the green confirmation button.
Regards,
Eric Schott