HI,
Please check sch picture as below:
From PCIe(RC) and to Device(EP) may accept lane reversal and polarity inversion.
I'd like to know the ReDriver can do polarity inversion for PCIe signals?
B&R
Perry
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
HI,
Please check sch picture as below:
From PCIe(RC) and to Device(EP) may accept lane reversal and polarity inversion.
I'd like to know the ReDriver can do polarity inversion for PCIe signals?
B&R
Perry
Greetings,
Per PCIe specification, polarity inversion is done on the protocol layer. In other words, PCIe NRZ data is polarity insensitive. This means you can connect - for ease of layout - negative of M.2 to positive of the device(after AC coupling). Then protocol layer will adjust accordingly.
Regards ,, Nasser