Other Parts Discussed in Thread: ALP
Could you please verify the configuration code for 935+936 I2S transmission, 935 GPIO0/1/2 as input and only 1 camera in port0, 936 GPIO0/1/2 as output? We tried below code but it doesn't work.
Read back 0x53 (check input pin status)=0x02
Read back 936: 0x59=0x6b, 0xDC=0x02 and 0x0E=0x10 (check output pin status)
Appreciate you could share your feedback by today as it's very critical timing, many thanks.