This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

DP83867IR: DP83867IR three-supply power-up sequence

Part Number: DP83867IR

Hi,

I have one question related with Power supply sequence in three-supply mode on DP83867IR. 

According to datasheet, we can find "When operating in three-supply mode, the 1.8-V VDDA1P8 supply must be stable within 25 ms of the 2.5-V VDDA2P5 supply ramping up."  Also, on another E2E thread, if 1.8V is earlier power-up than 2.5V, it is possible to flow current from 1.8V line to 2.5V line.  This situation is not so good.

So I have one question.   2.5V_line starts ramping up before 1.8V_line, and voltage of 2.5V_line never exceed voltage of 1.8V_line, but 1.8V is faster stable than 2.5V line within 25ms.  Is it no issue?  Please advise us.

Thanks and best regards,
M.HATTORI.