This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

TCAN1042HGV-Q1: Connect STB directly to GND

Part Number: TCAN1042HGV-Q1

Hello team, 

I want to check with you, if we can also connect the STB directly to GND if not needed or do we need a 10k Ohm resistor? 



  • Hi Matt,

    The STB pin may be tied directly to GND if the standby function is not needed. Because this pin has an internal pull-up to Vio, an external pull-down would help limit the leakage current through this unused pin (-20uA max when tied directly to GND). 

    Let me know if you have any more questions.

    Eric Schott