• State Resolved
  • Locked Locked
  • Replies 2 replies
  • Subscribers 32 subscribers
  • Views 157 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

TPS6598X-CONFIG: Need version 6.1.1

Rick Hille
Intellectual 410 points
Part Number: TPS6598X-CONFIG

Hi.  I need to download some customer legacy design bit files and using the latest GUI build V6.1.2 fails to program and verify the Flash SPI PROM.  The project file reports build version of 6.1.1 and we cannot rebuild it to 6.1.2, nor do we have access to the machine on which the 6.1.1 GUI tool was installed, so we need a loadable copy of the V6.1.1 GUI config tool.   TI does not seem to have a download archive (bad idea), and Wayback Machine saved the link page to 6.1.1 but didn't save the actual download link/file as the GUI tool download requires authorization.

  • 0
    TI__Intellectual 2370 points

    Hi Rick,

    I think V6.1.2 can open the .pjt file which is generated from V6.1.1. However both version cannot support 98xDJ, they can only support 98xDH, not sure if you use the DJ device?

    Thanks.

    Bing

  • +1 in reply to Bing Hwang
    Intellectual 410 points

    The design uses a DDJ in one position and DDH in another.  Are you saying the 6.1.2 cannot support DDJ?  6.1.1 must be able to support DDJ since the .pjt file was originally built under 6.1.1.

    We solved the immediate problem temporarily by not using the TPS6598X-CONFIG utility but through a separate SPI Flash programming tool (Aardvark) and reading/copying the two flash bin files from a working board.  Not the most elegant approach but we are now at least moving past the dead-stop that arose from the inability of 6.1.2 to import projects built under 6.1.1