The TI E2E™ design support forums will undergo maintenance from July 11 to July 13. If you need design support during this time, open a new support request with our customer support center.

  • State TI Thinks Resolved
  • Locked Locked
  • Replies 1 reply
  • Answers 1 answer
  • Subscribers 33 subscribers
  • Views 181 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

DS90LV049: DS90LV049

David Hiemstra
Prodigy 10 points
Part Number: DS90LV049

I’m looking for some technical support regarding DS90LV049QMTX. We had a test situation where we believe the ground of DS90LV049QMT for milliseconds was at least 5V ie. 1.7 higher than the 3.3V rail. The return current was in the range of 80 mA. Upon review of the datasheet there is no information describing the ability of the part with respect to surviving such an over stress or possibility of latent damage.

Your assistance is appreciated.