DP83620: Changing DP83630 to DP83620

Alex Da Silva

Part Number: DP83620
Other Parts Discussed in Thread: DP83630,

Hi Team,

The customer wants to change the DP83630 DP83630 with DP83620 and they have some concerns about the Pins23 and 24.
They have in their design two DP83630 which are connected like this: Pin23 with Pin23 and Pin24 with 24 of the DP83630

But for the DP83620 the Pins 23 and 24 are RESERVED.

Now they would like to know what impact that could have? if they use the DP83620 instead of the DP83620 because of the Pins23 and 24.

Thanks and Regards,
Alex

over 2 years ago

0 Kallikuppa Sreenivasa over 2 years ago

TI__Guru** 123058 points

Hello Alex,

Thank you for the query.

These pins are reserved and should not be connected to any external logic or net for most implementations.

Please reach out through email if you have additional inputs or thoughts.

Regards,

Sreenivasa

0 Alex Da Silva over 2 years ago in reply to Kallikuppa Sreenivasa

TI__Intellectual 1220 points

Hi Sreenivasa,

I would have one more question. I will send you an email.

Regards,
Alex

0 Kallikuppa Sreenivasa over 2 years ago in reply to Alex Da Silva

TI__Guru** 123058 points

Hello Alex,

Noted and thank you.

Regards,

Sreenivasa

+1 Kallikuppa Sreenivasa over 2 years ago in reply to Kallikuppa Sreenivasa

TI__Guru** 123058 points

Hello Alex,

We have been discussing over email. Should we close the thread.

Regards,

Sreenivasa

Interface

Interface forum

DP83620: Changing DP83630 to DP83620