• State Resolved
  • Locked Locked
  • Replies 1 reply
  • Subscribers 32 subscribers
  • Views 130 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

Original question:

TPS65988: TPS65988 Schematic Review required

TPS65988: TPS65988 EVM - Configuration file

Anushree H
Prodigy 70 points
Part Number: TPS65988

Hello,

Can I get the TPS65988 EVM out of the box default configuration file(project) in .pjt format. We are using TPS65988 PD controller in one of our designs and we are testing it with the EVM. 

  • +1
    TI__Mastermind 25870 points

    Anushree,

    When you load the GUI, If you create a new project, select the TPS65988 as the device, select the advanced option, then select the Dual Role Port (DRP), prefers power source.

    This will create a project that is the same configuration as the default EVM.  The only difference that you will see is that the version of firmware used will be the version of firmware provided with the GUI, rather than the version used when the EVM was manufactured.  They may be different.

    Regards,

    Chuck