TUSB1210EVM: Couple Design question on TUSB1210

user4760726

Part Number: TUSB1210EVM

Hi team,

Below is some questions regarding to the device. Is it possible to get your comment on this?

Is it possible to share complete schematics to me?
For the host, If we use type A USB type A connector, should I leave ID pin floating or connect ID pin to GND?
I still could not understand ULPI Input Clock mode and ULPI Output Clock mode. How should I choose them?

Best Regards,

Leroy Song

0 Brian Zhou over 2 years ago

Hi:

for host, you can connect ID to Gnd.

for input clk mode, CLOCK is used as reference clk which is from ULPI.

for output, REFCLK is used as REFERENCE CLK and use external oscillator.

Pls accept my friendship request and I an send schematic.

Regards

brian

0 user4760726 over 2 years ago in reply to Brian Zhou

Brian,

Thanks for the reply. I do not see the request from you yet, instead i sent you the request. Please check it and let me know. thanks!

Best Regards,

Leroy Song

0 Brian Zhou over 2 years ago in reply to user4760726

sent

Interface forum