Hello support team,
Customer inquires mirror mode behavior. Mirror mode changes the port, does it also change polarity, too?
Thanks,
Koji Ikeda
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Hello support team,
Customer inquires mirror mode behavior. Mirror mode changes the port, does it also change polarity, too?
Thanks,
Koji Ikeda
Hello Koji Ikeda
Thank you for the query.
Your understanding is correct.
Regards,
Sreenivasa
Hello Koji Ikeda
Please refer to the DP83867 EVM. We have used the mirror mode.
Regards,
Sreenivasa
Hello Koji Ikeda
Please let me know if you have additional questions. If not Please click he resolved button to close the thread.
Regards,
Sreenivasa
Hello Koji Ikeda
Wishing you a happy new year 2022.
Please refer to the below section.
8.4.6.6 Mirror Mode
Regards,
Sreenivasa
Hello Kallikuppa-san,
Which description in 8.4.6.6 shows polarity change by mirror mode?
Thanks,
Koji Ikeda
Hello Koji Ikeda
Please refer below
Mirror mode can be enabled through strap or through register configuration using the Port Mirror Enable bit in the CFG4 register (address 0x0031). In Mirror mode, the polarity of the signals is also reversed.
Regards,
Sreenivasa
Hello Kallikuppa-san,
"In Mirror mode, the polarity of the signals is also reversed." looks like to show no polarity change. Is this correct?
Thanks,
Koji Ikeda
Hello Koji Ikeda
Thank you for the reply. Yes that is correct.
Regards,
Sreenivasa
Hello Kallikuppa-san,
If no polarity change, is the customer understanding wrong?
Thanks,
Koji Ikeda
Hello Koji Ikeda
Please refer datasheet description.
In Mirror mode, the polarity of the signals is also reversed.
Customer understanding i correct.
Regards,
Sreenivasa
Hello Koji Ikeda
I am closing the thread since i have not heard from you.
Regards,
Sreenivasa