• State
  • Locked Locked
  • Replies 1 reply
  • Subscribers 32 subscribers
  • Views 186 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

Original question:

DS90UB913A/914A - Using ALP Issue

DS90UB913Q-Q1: USB2ANY tool cannot find DS90UB913

Tiger Wang
Expert 1535 points
Part Number: DS90UB913Q-Q1

Dear Sir,

My system based on DS90UB954, it can find DS90UB953 baord and operate correctly, but it cannot find 90UB913 board anyway.

Can you give me more advice?

Best regards.

David 

  • 0
    TI__Guru* 98475 points

    Hello David,

    For pairing with the 913, the corresponding RX port must be configured for one of the RAW modes instead of CSI-2 mode, and the back channel rate must be configured for 2.5Mbps instead of 50Mbps 

    Best Regards,

    Casey