Because of the Thanksgiving holiday in the U.S., TI E2E design support forum responses may be delayed the week of Nov. 21. Thank you for your patience.

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

DP83825I: DP83825I RMII slave mode on EVM...

Part Number: DP83825I
Other Parts Discussed in Thread: DP83825

Dear Sirs,

My customer use DP83825I EVM to test RMII slave mode but fail.

They use fly-wire to connect their main chip - M550S to EVM.

Below are the schematics for M550S and DP83825I(replace IP101).

M550S.pdfDP83825.pdf 

The MCIO/MDCK seems no problem but TX/RX cannot work. 

Please help to check if there is anything wrong with the connection or necessary setting on EVM.

Thanks.