TUSB1002A: TUSB1002A common mode choke

Suresh Chandra Mannava

Prodigy 110 points

Part Number: TUSB1002A

Does TUSB1002A recommends using of common mode choke for TX & RX?

We are planning to use TUSB1002A between host and the connector.

Regards,

Chandra

over 2 years ago

+1 Malik Barton57 over 2 years ago

TI__Guru 64326 points

Hi Chandra,

A CMC can be used in-between TUSB1002A and the connector on the TX and RX. Be sure that the CMC differential insertion loss and return loss is low to not impede data communication.

0 Suresh Chandra Mannava over 2 years ago in reply to Malik Barton57

Prodigy 110 points

Thanks Malik,

Can you recommend CMC? Plan to use Wurth - 7442335600.

Chandra

+1 Malik Barton57 over 2 years ago in reply to Suresh Chandra Mannava

TI__Guru 64326 points

Hi Chandra,

DLP2ADA350HL4 works well. Wurth - 7442335600 looks good as well.

0 Suresh Chandra Mannava over 2 years ago in reply to Malik Barton57

Prodigy 110 points

Thanks for your suggestion.

Interface

Interface forum

TUSB1002A: TUSB1002A common mode choke