Hi team,
Is there a reference PCB layout for DS90UB962-Q1 which follows the best EMC practice?
regards,
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Hi team,
Is there a reference PCB layout for DS90UB962-Q1 which follows the best EMC practice?
regards,
Hello Shinji-san,
You can use the DS90UB960-Q1EVM design as a reference since the two devices are pin to pin compatible
Best Regards,
Casey
Hi Casey,
Is there EMC report of UB96x board available?
I would like to see spectrum over 30MHz to 6GHz.
regards,
Hey Shinji,
We don't have a full report for this device but we have this side showing CISPR25 over the desired range with 953 at least:
Best Regards,
Casey
Hi Casey,
Is this data taken with the UB960 EVM?
Is there a setup information of this data?
regards,
Hello Shinji,
Yes this is with 960 EVM. The setup is 960 EVM to 953 EVM with a 1m Dacar 302 cable in a CISPR25 chamber
Best Regards,
Casey