DS90UH948-Q1EVM: 3D model or gerbers needed

Chris Beynon

Part Number: DS90UH948-Q1EVM

We are making an enclosure for a prototype system including the EVM and therefore need accurate dimensions including connectors. Therefore please can you supply ideally a 3D model (e.g. STP) or gerbers.

Thanks,

Chris.

over 2 years ago

0 Aaron Heng over 2 years ago

TI__Mastermind 32600 points

Hi Chris,

Thank you for reaching to us. Yes, I should be able to provide you the step model. Let me investigate this, and I will get back with by Tuesday, 2/8.

Aaron

0 Aaron Heng over 2 years ago in reply to Aaron Heng

TI__Mastermind 32600 points

Hi Chris,

After carefully thought about this, I would like to further discuss with you. I will provide you a private chat shortly.

Aaron

0 Aaron Heng over 2 years ago in reply to Aaron Heng

TI__Mastermind 32600 points

Hi Chris,

Just want to check with you if you have a chance to accept my friend invitation so that we can discuss in a private chat.

Aaron

0 Chris Beynon over 2 years ago in reply to Aaron Heng

Prodigy 50 points

Hi Aaron - I did accept two days ago but have seen nothing since.

Chris.

0 Aaron Heng over 2 years ago in reply to Chris Beynon

TI__Mastermind 32600 points

Hi Chris,

Thank you for confirmation. Let me check on my end. I will close this ticket for now, and move into our private chat.

Aaron

0 Chris Beynon over 2 years ago in reply to Aaron Heng

Prodigy 50 points

I do need this urgently now, so please can you email me if the chat isn't working - it's much simpler!

0 Aaron Heng over 2 years ago in reply to Chris Beynon

TI__Mastermind 32600 points

Hi Chris,

Sorry I pinged the wrong person. I saw your chat replied this morning. I will let you know what I can do.

Aaron

Interface

Interface forum

DS90UH948-Q1EVM: 3D model or gerbers needed