DP83848VYB: What is the material on the solder pins surface?

Per-Anders Welz

Part Number: DP83848VYB

I am looking into the possibility to replace DP83848IVV with DP83848VYB and got worried about the surface treatment of the pins.

On the DP83848VYB/NOPB the datasheet says only SN while the DP83848IVV/NOPB can have SN or NIPDAU.
Which one is used on the standard DP83848IVV that you can purchase at the regular suppliers?

Hoping to get help finding that out.

Best regards
/P-A

over 2 years ago

0 Clemens Ladisch over 2 years ago

Guru 244020 points

As shown on ti.com/quality-reliability-packaging-download/report?opn=DP83848IVV/NOPB, there are three assembly sites. The devices that you can purchase can come from any of these sites.

Anyway, the lead finish should not make any difference, except when you're using SnPb solder.

0 Per-Anders Welz over 2 years ago in reply to Clemens Ladisch

Prodigy 10 points

Thank you for the help.

This fully explains the confusion and makes the surface finish a non-issue.

Best Regards
/P-A

Interface

Interface forum

DP83848VYB: What is the material on the solder pins surface?