Because of the Thanksgiving holiday in the U.S., TI E2E™ design support forum responses may be delayed from November 25 through December 2. Thank you for your patience.

  • State Resolved
  • Locked Locked
  • Replies 2 replies
  • Subscribers 32 subscribers
  • Views 162 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

DS25BR440: review on input signal level

Shubiao Wang
Intellectual 1490 points
Part Number: DS25BR440

Hi there,

please have review on the tested input signal level.

questions is:

1. input signal VH may lower than 100mV, input VL may higher than -100mV. however, according the datasheet, the maximum value of VH is 100mV, the maximum VL is -100mV.

the output signal eye is large enough. in this case,  is there any potential risk for the input signal level?

test condition: 25 ℃， 2.37Gbps.

BRs,

Shubiao