SN65DSI85: Connection of Data Signals

Masakazu Adachi

Part Number: SN65DSI85

Hello team,

Is it possible to connect data signals in this way?

DSI-D3-P―――――　DA2P　　　A_Y2P ―――――A-Y3P
DSI-D3-N―――――　DA2N　　　A_Y2N ―――――A-Y3N
DSI-D2-P―――――　DA1P　　　A_Y1P ―――――A-Y2P
DSI-D2-N―――――　DA1N　　　A_Y1N ―――――A-Y2N
DSI-D1-P―――――　DA3P　　　A_Y3P ―――――A-Y1P
DSI-D1-N―――――　DA3N　　　A_Y3N ―――――A-Y1N
DSI-CLK-P――――― DACP　　　A_CLKP ―――――A-CLKP
DSI-CLK-N――――― DACN　　　A_CLKN ―――――A-CLKN

Regards,

Masakazu

over 2 years ago

+1 David (ASIC) Liu over 2 years ago

TI__Guru*** 139405 points

Masakazu-san

Please see section 7.4.5 LVDS Output Formats of the DSI85 datasheet. It depends on whether the LCD panel can support the lane swapped output format.

Thanks
David

0 Masakazu Adachi over 2 years ago in reply to David (ASIC) Liu

TI__Intellectual 2500 points

Hi David-san,

Thanks to confirm it.

I tell my customers.

Regards,

Masakazu

0 Masakazu Adachi over 2 years ago in reply to Masakazu Adachi

TI__Intellectual 2500 points

Hello David-san,

The customer is asking if only the data lines in the SN65DSI85ZQER can be changed.

As you can see, the inputs and outputs are the same number and are connected to different lanes.

If some processing is being done in the SN65DSI85 in the order of the Data Lanes, then it would not be a good idea to swap the order of the Data Lanes, would it?

Please let us know what you think.

Regards,

Masakazu

+1 David (ASIC) Liu over 2 years ago in reply to Masakazu Adachi

TI__Guru*** 139405 points

Masakazu-san

As long as the input data lane order matches with the output data lane order, then I don't see this as an issue.

Thanks

David

0 Masakazu Adachi over 2 years ago in reply to David (ASIC) Liu

TI__Intellectual 2500 points

Hi David-san,

I understand.

Thanks to the support.

Regards,

Masakazu

Interface

Interface forum

SN65DSI85: Connection of Data Signals