DP83TC811R-Q1: PHY PMA test setup and standards

Elec Cheng

Expert 7055 points

Part Number: DP83TC811R-Q1

Hi Expert,

Our customer use DP83TC811R-Q1 and they fail some items in PMA test. The test result is as below.

Could you please help with below request:

could you please give some advice about the cause of bad test result?
Could you please share PHY PMA test setup and standards material if you have? We are working with our customer to make sure that they perform the test correctly. So anything related would be highly appreciated.

Thanks a lot for help!

BR,

Elec Cheng

over 2 years ago

+1 Hillman Lin over 2 years ago

TI__Genius 17355 points

Hi Cheng,

This test was tested in the third party UNH lab, they can see all the test setup on the UNH website. We have all the passing result on PMA test but they need a NDA in order to shared the result. SNLA293 are the register setup we use for PMA test but also require a NDA as well.

Regards,

Hillman Lin

0 Elec Cheng over 2 years ago in reply to Hillman Lin

TI__Expert 7055 points

Hi Hillman,

I am TI FAE and our customer have NDA agreement. Please kindly share those material with me via e-mail. Thanks.

BR,

Elec Cheng

Interface

Interface forum

DP83TC811R-Q1: PHY PMA test setup and standards