• State Resolved
  • Locked Locked
  • Replies 1 reply
  • Subscribers 32 subscribers
  • Views 101 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

FPC402: Current Output Drive Strength

Joseph Cohen
Prodigy 470 points
Part Number: FPC402

Hi Team,

It is possible to change/control the current output drive strength on OUT_A and OUT_B?

The datasheet mentions +/-2mA, but we're hoping to increase this to source/sink more current.

Thanks,

Joe

  • 0
    TI__Guru* 88765 points

    Greetings Joseph,

    This is the test condition that is used to guarantee VOH and VOL range as noted in the data sheet. This range is checked in production. Suggestion is to use this criteria. If you want to get higher sink or source current please consider using external buffer after FPC OUT_A or OUT_B.

    Regards,Nasser